LAMP vs PCR testing for SARS-COV-2

Get your science fix here: research, quackery, activism and all the rest
Post Reply
User avatar
jimbob
Light of Blast
Posts: 5276
Joined: Mon Nov 11, 2019 4:04 pm
Location: High Peak/Manchester

LAMP vs PCR testing for SARS-COV-2

Post by jimbob » Tue Mar 23, 2021 3:36 pm

https://twitter.com/V_Saggiomo/status/1 ... 9816314880

I have no idea as to the practicality of this,
Finally is out, our super cheap, easy to produce in millions, almost universal, and with low waste impact nucleic acid detection (LAMP test for #COVID19) non-instrumental device. The answer is: a Nespresso capsule. The question is: why we did this? 1/n

https://chemrxiv.org/articles/preprint/ ... n/14224481
Any chemists care to comment - *is* it being oversold in this series of tweets?
Have you considered stupidity as an explanation

User avatar
Turdly
Clardic Fug
Posts: 207
Joined: Mon Nov 11, 2019 5:07 pm
Location: High Peak

Re: LAMP vs PCR testing for SARS-COV-2

Post by Turdly » Wed Mar 24, 2021 8:36 am

I've interacted with Vittorio on and off over the years. He's a really nice guy but I'd say that he can be a little naive at times.

I can't say I've looked into LAMP recently, but my OH (a virologist-turned toxicologist) spent a year working on LAMP-based diagnostics and thinks it is shite. That was 10 years ago though.

Some general issues with these sorts of things:
- colorimetric assays need unbiased readers (i.e. not a person) particularly when going from one colour to another otherwise it is easy to convince yourself it is not really positive/negative. This is why lateral flow assays have a control stripe to compare to (and to ensure the assay is working).
- anyone working in healthcare diagnostics can tell you that the cost of the instrument is not the problem it is the cost per assay. If a company can tie you into buying a lot of consumables for the next 10 years then they'll pretty much give you the instrument (ironically, the same model that Nespresso work on!)
- the idea that because Nespresso have a plant for filling little aluminium pods with ground coffee means that they can also fill pods with a phase-change material, then melt and mould it, is laughable. Someone needs to watch Inside the Factory to understand how specialist these types of facilities are.
- the obsession with 3D printing. Here, it is useful for demonstrating a prototype device but it reality if you needed to make millions of plastic tube holders it'd be infinitely cheaper and quicker to make them by injection moulding.
briefly Stephanie's favourite user

User avatar
jimbob
Light of Blast
Posts: 5276
Joined: Mon Nov 11, 2019 4:04 pm
Location: High Peak/Manchester

Re: LAMP vs PCR testing for SARS-COV-2

Post by jimbob » Wed Mar 24, 2021 9:00 am

Turdly wrote:
Wed Mar 24, 2021 8:36 am
I've interacted with Vittorio on and off over the years. He's a really nice guy but I'd say that he can be a little naive at times.

I can't say I've looked into LAMP recently, but my OH (a virologist-turned toxicologist) spent a year working on LAMP-based diagnostics and thinks it is shite. That was 10 years ago though.

Some general issues with these sorts of things:
- colorimetric assays need unbiased readers (i.e. not a person) particularly when going from one colour to another otherwise it is easy to convince yourself it is not really positive/negative. This is why lateral flow assays have a control stripe to compare to (and to ensure the assay is working).
- anyone working in healthcare diagnostics can tell you that the cost of the instrument is not the problem it is the cost per assay. If a company can tie you into buying a lot of consumables for the next 10 years then they'll pretty much give you the instrument (ironically, the same model that Nespresso work on!)
- the idea that because Nespresso have a plant for filling little aluminium pods with ground coffee means that they can also fill pods with a phase-change material, then melt and mould it, is laughable. Someone needs to watch Inside the Factory to understand how specialist these types of facilities are.
- the obsession with 3D printing. Here, it is useful for demonstrating a prototype device but it reality if you needed to make millions of plastic tube holders it'd be infinitely cheaper and quicker to make them by injection moulding.
Thanks. I suspected that it was an interesting proof of concept, but little else. And as you say, 3D printing is great for prototypes or short runs.

The one in red seems to be a pretty fundamental issue. The rest look to be things that could get altered by setting up an appropriate supply chain, and with a reasonable cheapness for at least certain low-utilisation systems.
Have you considered stupidity as an explanation

User avatar
shpalman
Princess POW
Posts: 8244
Joined: Mon Nov 11, 2019 12:53 pm
Location: One step beyond
Contact:

Re: LAMP vs PCR testing for SARS-COV-2

Post by shpalman » Wed Mar 24, 2021 9:57 am

As we saw from the kid who built his own PCR basically all you need for this sort of thing, once you have the necessary reagents, is the right sort of temperature profile.
having that swing is a necessary but not sufficient condition for it meaning a thing
@shpalman@mastodon.me.uk

User avatar
nekomatic
Dorkwood
Posts: 1377
Joined: Mon Nov 11, 2019 3:04 pm

Re: LAMP vs PCR testing for SARS-COV-2

Post by nekomatic » Thu Mar 25, 2021 11:49 pm

Turdly wrote:
Wed Mar 24, 2021 8:36 am
I've interacted with Vittorio on and off over the years. He's a really nice guy but I'd say that he can be a little naive at times.
He doesn’t seem great at recognising that something is not a compliment:
F362D197-A9D2-4A8F-B9A2-46647E097A68.jpeg
F362D197-A9D2-4A8F-B9A2-46647E097A68.jpeg (193.99 KiB) Viewed 1618 times
Move-a… side, and let the mango through… let the mango through

User avatar
Turdly
Clardic Fug
Posts: 207
Joined: Mon Nov 11, 2019 5:07 pm
Location: High Peak

Re: LAMP vs PCR testing for SARS-COV-2

Post by Turdly » Fri Mar 26, 2021 6:13 am

shpalman wrote:
Wed Mar 24, 2021 9:57 am
As we saw from the kid who built his own PCR basically all you need for this sort of thing, once you have the necessary reagents, is the right sort of temperature profile.
Yes, and cheap basic PCR machines have been known for years e.g. this one from 2007.

The whole article is a bit "emperor's new clothes" and their bibliography helpfully shows it. The concept of the device is not new. They've taken a set of LAMP reagents, and primers designed by someone else. They've taken a commercial phase-change material that matches the temperature of previous PCM-based devices. The "inventive step" is putting the PCM in an empty Nespresso capsule and using a bowl of hot water to heat the PCM - this is a nice idea but not exactly ground breaking.

Although not in the paper, Vittorio thinks that this can be easily scaled
Screenshot 2021-03-26 at 06.10.16.png
Screenshot 2021-03-26 at 06.10.16.png (32.25 KiB) Viewed 1609 times
but is still selling it on the being waste free and that 3D printing is important
Screenshot 2021-03-26 at 06.11.35.png
Screenshot 2021-03-26 at 06.11.35.png (41.65 KiB) Viewed 1609 times
which is BS as it requires significant changes to manufacturing, and you'd be laughed at if you tried to make millions/billions of holders with 3D printing.
briefly Stephanie's favourite user

User avatar
jimbob
Light of Blast
Posts: 5276
Joined: Mon Nov 11, 2019 4:04 pm
Location: High Peak/Manchester

Re: LAMP vs PCR testing for SARS-COV-2

Post by jimbob » Fri Mar 26, 2021 10:26 am

nekomatic wrote:
Thu Mar 25, 2021 11:49 pm
Turdly wrote:
Wed Mar 24, 2021 8:36 am
I've interacted with Vittorio on and off over the years. He's a really nice guy but I'd say that he can be a little naive at times.
He doesn’t seem great at recognising that something is not a compliment:
F362D197-A9D2-4A8F-B9A2-46647E097A68.jpeg
To be fair, phase change materials* are pretty cool in certain applications.


*to me PCM means "process control modules" which are specific test patterns one creates in semiconductor processing in order to electrically measure various parameters that depend on the process - for example diffusion lengths of implants, and how they affect the location of PN junctions,
Have you considered stupidity as an explanation

User avatar
shpalman
Princess POW
Posts: 8244
Joined: Mon Nov 11, 2019 12:53 pm
Location: One step beyond
Contact:

Re: LAMP vs PCR testing for SARS-COV-2

Post by shpalman » Fri Mar 26, 2021 10:34 am

That "phase change material" is "just" there to provide temperature stability?

Neat though to find something which melts at the temperature you want.

PCM to me means pulse-code modulation.
having that swing is a necessary but not sufficient condition for it meaning a thing
@shpalman@mastodon.me.uk

User avatar
jimbob
Light of Blast
Posts: 5276
Joined: Mon Nov 11, 2019 4:04 pm
Location: High Peak/Manchester

Re: LAMP vs PCR testing for SARS-COV-2

Post by jimbob » Fri Mar 26, 2021 2:27 pm

shpalman wrote:
Fri Mar 26, 2021 10:34 am
That "phase change material" is "just" there to provide temperature stability?

Neat though to find something which melts at the temperature you want.
That's how I understand it. I guess thermodynamics would say that any temperature-induced phase change will have a latent heat associated with it, which would work... not just melting or boiling.
Have you considered stupidity as an explanation

Post Reply